2 |MARCH 2019 — machinerysales
PNS160650
Swing Beam Shears
• Estun E21S digital controller.
• Transfer balls in worktable.
• Roving foot pedal control.
• Rapid blade adjustment.
• Padded hydraulic hold down.
• Side & front protection guards.
• Photo-electric sensors at the back.
• Pendant control box, quick swivel & adjustments.
• Hardened ballscrew type swing away backgauge.
• One shot lubrication pump & reservoir for slideway protection.
• Front support arms with rollers, flipover stops, and mitre gauge.
• Laser light shadow alignment device.
IW-60S
$16,000
Gift Vouchers
available
SKU SRH132211 SRH132225
Model HS4x2500 HS8x3200
Price (ex GST) $15,900 $29,000
Mild Steel Capacity (mm) 4 8
Blade Length (mm) 2500 3200
Hold Downs (no.) 9 11
Holding Force (bar) 40 40
Controller (Estun) E-21S E-200S
Backgauge (mm) 900 900
Motor Power (kW) 4 7.5
Hardened ballscrews
PUNCH & SHEARS
CP-920240
Motorised backgauge
NOW IN
STOCK
COMPRESSORS
Global 180L $990
MM-280822
from
$20
COM105420
T25A DP-32
$1,935 $822
DRILL PRESSES
CUT OFF SAWS
CS350 $2,430
• SKU: ROL131273
• Model: ASM 130-20/3
• Working Length: 2050mm
• Max Thickness: 4.0mm
• Top Roll Diameter: 130mm
• Minimum Radius: 190mm
• Bending Speed: 5.3m/min
• Motor Power: 2.2kW
Powered Slip Rolls
• Hardened rolls and a cast iron frame.
• Central rollers driven by electric motor, gearbox and gearbox system.
• Lower and back rolls are moved up and down using a handwheel.
• Safety wire interlock system with emergency shut-off.
• Seperate moving control panel with foot pedal.
• Cone bending device.
• Self brake main motor.
MILLING MACHINES
TM330
$17,200
• Top roll can be swivelled out.
ZX7550W
$7,900
NC Press Brakes
• Estun E200P digital controller.
• Hydraulic / mechanical ram.
2018 CHRISTMAS SPECIALS !
DMC348942
DMC348439
ROL31300
• Lintech light curtains.
• Synchronised stop design.
• Hardened ballscrew back gauge.
• Pendant control box, quick swivel & adjustments.
• Fabricated steel torsion bar for consistent parallelism.
• Movable front supports on guide rails for adjustments of sheet widths.
SKU PBK100091 PBK100102
Model PBNC- 125 x 3200 PBNC- 160 x 4200
Price (ex GST) $45,000 $58,000
Pressing Force (Ton) 125 160
Bending Length (mm) 3200 4200
Stroke (mm) 100 200
Max Daylight (mm) 360 470
Between Columns (mm) 2650 3200
Throat Depth (mm) 250 420
Approach Speed (mm/sec) 50 100
Pressing Speed (mm/sec) 7.5 10
Return Speed (mm/sec) 45 100
Table Crowning Y N
Hardened ballscrews
Motorised backgauge Motor Power (kW) 6.5 11
Excellence in forming
CALL
US FOR A
FULL PRICE
MM-228620
BSH101360
SRH132225
Hard time picking
the “right” prezzie?
Our Gift Vouchers
got you covered!
BSH101679
Semi-Automatic UE-330SSA
$13,200
George Series CY-350 BANDSAWS
$7,505
Sectional Rollers
GUILLOTINES
BENZEL 8 x 3200mm
• Steel body construction.
• Manual lubrication.
• Digital display $32,000
for lower rolls.
• Hydraulic movement of lower rolls (L--up 120030
and down).
• Rolls are driven by a hydraulic motor & planetary gearbox.
• Shafts & rollers are made from special hardened and ground steel.
• Separate and moveable control panel.
• Can be used horizontally or vertically.
• Shaft Ø: 80mm
• Bending Speed: 4.2m/min
• Motor Power: 5kW
GL6256 80Ø Bore
$19,900
SLIP ROLLS
$21,900 exGST
WMP290V-F LATHES
$5,850
• SKU: SRM131720
• Model: APK81
• Roller Ø: 245mm
Profile Capacity
max size (min Ø) 80 x 80 x 8(1600)
max size (min Ø) 80 x 80 x 8 (2000)
max size (min Ø) 80 x 8 (1400)
max size (min Ø) 80 x 8 (1400)
max size (min Ø) 80 x 8 (1400)
max size (min Ø) 80 x 25 (700)
max size (min Ø) 120 x 30 (600)
PRESSBRAKES
160T X 4200MM
FLD131429
* ALL PRICES ARE +GST
BSH101656
Horizontal / Vertical BS-912
AKYAPAK AHK20/04
$35,000
GL6256 103Ø Bore
$21,800
max size (min Ø) 45 x 45 (1000)
max size (min Ø) 60 (1000)
HP-300165
max size (min Ø) 100 x 3 (3000)
max size (min Ø) 88.9 x 4 (1600)
max size (min Ø) 100 x 40 x 3.2
max size (min Ø) 70 x 70 x 4
max size (min Ø) UNP140 (1200)
max size (min Ø) UNP140 (1200)
BL-336D
$5,100
$10,500exGST
HYDRAULIC PRESSES
Turret Punch
• Adjustable stroke and speed.
• Siemens 840D CNC system.
• Automatic selection.
• Automatic overload protection.
• Centralized lubrication system.
• Integral beam structure ensures rigidity.
• Thick turret with high quality rotary turntable.
• Ballscrews and linear guides for ensured precision.
• Clamp protection function to avoid damaging the mold.
2500 x 1.6mm (Magnetic)
$9,400
FOLDERS
L--120482
PBK100102
FLD131800
$59,800
2440 x 2.0mm (Manual)
$5,790
$1,980
100 TON
$6,120
FLD131900
2500 x 4mm (Hydraulic)
$15,700
LIST
Turkey
L--120513
LCN301210 LCN250110
GL-0811
$21,850
CNC LATHES
CAK61135GI
$65,000
COME IN &
MEET THE TEAM FOR
SOME SHARP DEALS
TODAY !
MMC500176
• Model: ES30P-1250x5000
• Max Sheet Size: 1250 x 5000mm
• Max Sheet Thickness: 6.35mm
• Max Punch Ø: 89mm
• Main Cylinder Stroke: 32mm
• Max Feeding Speed: 96m/min
• Accuracy: ± 0.1mm
• Max Load Capacity: 150kg
• Main Motor Power: 60kVa
CNC MILLS
MMC400250
GL550L
$29,000
Brio Milling Centre
$52,500
www.chevpac.co.nz Pictures may vary from actual product. Specifications may change without notice. Terms & conditions apply. ph 0508 243 872
CM 8452
/www.chevpac.co.nz
