machinerysales — NOVEMBER 2018 | 7
Deburr parts up to 1m wide
with minimal surface marking
STAY INFRONT OF
YOUR COMPETITION
RA 8326 0800 288 668 www.reform-automation.co.nzco.nz
0800 288 668
www.reform-automation.co.nz Phone:
Make your
parts look
sharp, not
sharp parts
ENC 2280 CNC Lathe
EX-STOCK
PRESS From $67,990 Ph: (09) 274 Email: info@All yours for only $89,000 + GST
• FAGOR 8060 FL controller with easy to use graphical programming • 10” steel body
3-jaw • 560ø x 2000mm b/c • 16” 4-Jaw • Machining envelope with tool turret 420ø
x 1650mm • 8-station tool turret (VDI-40 mount) • 26- 2400 rpm (3 ranges)
• Spindle bore 80mm • Steady rest 25-145mm & 95-220mm • Lathe is on the water
LR 8312
Ph: (09) 274 6186
Email: info@leabourn-rose.co.nz Heavy Machine Tools
JOBBING WORK
WANTED
CUSTOMLIGHT ENGINEERING
2015 LTD
Powder Coating * Fabrication *
Sheetmetal Work
We listen to our customers first,
then manufacture what they
need. No job too small, nor too
big.
www.customlight.co.nz
03 341 7175
SPECIALISTS IN DESIGN, PROTOTYPING
AND CNC MACHINING.
We cater for production runs,
one offs and full
assemblies in a wide range of
materials.
www.redwoodengineering.co.nz
09 625 8832
LASER
NZLASER: LARGE TO SMALL
+ CNC MACHINES AVAILABLE.
WE:
*do demonstrations
*freely help you find the best
laser for your needs
*install, setup software
and train you
*carry parts & ‘spares kits’
Contact Ian at: 09-432-8596
0204 057 0493 or
sales@nzlaser.co.nz
LATHES
BRAND NEW SINGLE PHASE
3HP SUMORE LATHE
from one of the largest manufactures
in China, These are
made to my specification and
can be custom ordered to suit,
I have two here now one is in
my workshop replacing a
smaller Luxcut. This is available
to view and test run in my workshop,
the other one is still in its
crate and I will do a pre
delivery check prior to shipping.
When I went to upgrade the
old one I was disappointed in
the options in single phase and
pricing some were asking once
specked to my requirements.
These feature
1000mm between centers
400mm swing over bed
52mm spindle hole
1800rpm
induction hardened bed
3 Axis SINO DRO
Coolent
Work light
removable swaf tray
Foot brake
Quick change tool post
Safety chuck cover that will not
allow the chuck to turn if it is up
Safety switch on the gear cover
Main feed screw covers
200mm 2 and 3 jaw chucks
face plate
fixed and moving steady
live center etc etc
Full manuals including parts
manual,
$9,000 call Mike
027 625 9844
CENTRE LATHE 6240 DRO,
1000MM BETWEEN CENTRES,
200MM CENTRE HEIGHT, 52MM
BORE
3 jaw & 4 jaw chuck, 30-1400
rpm, 2 axis Sino DRO, 3 phase.
$6,500 incl GST. Other lathes
available new & used.
MacDonald Machinery,
Ph 0800 Machine,
sales@machine.co.nz,
www.machine.co.nz
TOS RYZAN CENTER LATHE.
1500 BETWEEN CENTERS.
Swing - 650
Bore 105mm
Condition Used
Digital XZ
3Jaw & 4Jaw Chucks
Live Center
Steady Rest
$5,750
Delivery and Installation can be
arranged if required
call Neil 021 288 6657
MATERIALS
HANDLING
SCHMALZ VACUMASTER - MOVE
HEAVY LOADS WEIGHING UP TO
SEVERAL TONS ERGONOMICALLY
AND SECURELY
the VacuMaster allows workpieces
to be handled effortlessly
by just a single operator while
protecting the employee’s
health. For example :
Loading and unloading CNC
laser cutting machines with
metal plates.
Loading and unloading CNC
machining centers with wooden
boards or plastic sheets.
This is German quality at it’s
very best - built to last.
www.schmalz.com OR contact
Automation Equipment on
0800 847 200 or e-mail
sales@autoequip.co.nz to
arrange a meeting.
THE VACUUM TUBE LIFTER JUMBOFLEX
ALLOWS YOU TO MOVE
LIGHTER GOODS UP TO 50 KG
ERGONOMICALLY AND WITH
HIGH CYCLE RATES
The control handle fits comfortably
in the hand and allows
the operator to work for a long
period of time without fatigue.
With simple one-finger
control, lifting, lowering and
releasing the load is extremely
intuitive.
The JumboFlex’s wide range of
features allows it to tackle virtually
any task. It comes standard
with a quick-change system for
replacing the suction
pads. Workpieces which are
gripped from the vertical side
automatically swing back into
the horizontal position where
they can be continuously
rotated. This is German quality
at it’s very best - built to last.
Www.schmalz.com OR contact
Automation Equipment on
0800 847 200 or e-mail
sales@autoequip.co.nz to
arrange a meeting.
IT WORKS!
Letter as received from happy
client - not edited
Hi Michael
I would just like to let you know how pleased we were with the
response from our machinerysales listings for machine tools that
we no longer required. It’s been very helpful that “you and your
team” have been able to prepare the advertisement, just from
photos and specifications given, saving us a lot of time, cost and
effort.
The end result was really good, with a large number of the
machines being already sold.
Unique Large Capacity Machine Keep up the good work
Tools for Sale
O-M Model including – 2 Axis Maximum auto CNC tool Ram changer,Type Maximum
Vertical workpiece swing 1000mm, 16 tools,Lathe Heavy weight Max and a duty 10.0 height tonnes under chuck pallet turning of on ram face changer. complex precision holders 1000 mm included diameter 990mm, vertical CNC Control – Fanuc parts,
with 4 jaw machine.chuck.travel 10T
Main of ram drive 600mm. Fidia P.O.Model A
30 Ted Mace
KW’s Some tool
spindle.D218 – 5 Axis – Fidia Ideal for high CNC High Speed axis rotating
High speed +/- 110 Speed Contouring finishing continuous deg,and path 1500mm milling table.C axis control engraving Auto +/- 361 degrees.system. X of tool axis moulds machine,–and with changer tilting and – rpm.24 Maximum Tools /workpiece 2000mm, Y axis precision 1000mm,parts. Feedrate HSK40 tool weight 9.5 CNC Control
up to 20 metres capacity,tonnes Z axis on 800mm, B
/ minute. Spindle fixed P.2500mm O.A
drive 6 KW 3200-x
32,000
Chairman
Swiss made tool and Agie diemaking.Model Integral Three 3 - linear Four Mace Group Ltd
CNC axis size axes,CNC EDM 800 x 600 mm with a machine with CNC controlled with 90 amp Max workpiece ( x,y,350 z ) 350x250x350mm.
mm travel of rotary power spindle.supply,weight ram head.
Max ideal workpiece
for
800kg’s, electrode weight 200kgs.Churchill P./ O.BSA A
Model D - Combination cylindrical and crankshaft grinder, together with,Christchurch
diamond
Heavy Duty Droop & Rein Vertical Milling Machine -
DC Axis Drives with digital readout on X & Y axes, Tilting Milling
spindle Capacity: X axis 1250mm, Y axis 800mm, Z axis 800mm Max
ME 7145
wheel dresser, some grinding wheels and steadies.
Workpiece length between chucks – 5 metres, swing over bed 1 metre.
Maximum workpiece weight capacity - 6 tonnes with steadies. P.O.A
Fidia Model K165 MBSH – 3+2 Axis CNC High Speed continuous
path milling machine, with CNC indexed bi-rotary angle tilting and
rotating spindle head. Ideal for high speed finishing and engraving
of moulds and precision parts. Fixed table 1400mm by 815mm.
Load on table 1500 kgs. CNC Control – Fidia High Speed Contouring
control system. X axis – 1000mm, Y axis 600mm, Z axis 500mm, B
axis +/- 25 deg, C axis +/- +180 degrees to -177 degrees, in 5 and
3 degree increments. Maximum workpiece weight 9.5 tonnes on
Auto tool changer fixed –2500mm 20 Tools x /1500mm HSK63E table.
tool capacity, Spindle drive
20 KW 30,000 rpm. Linear Feedrate up to 40 metres / minute. P.O.A
Fidia Model K165 - 3 Axis CNC High Speed continuous path milling machine.
Ideal for high speed roughing and finishing of moulds and precision
parts. Fixed table 1400mm by 815mm. Load on table 1500 kgs. CNC
Control Fidia High Speed Contouring control system. X axis – 1000mm,
Y axis 600mm, Z axis 500mm. Auto tool changer 20 tools. Linear feed
rates up to 40 metres / minute. Laser tool measuring device. P.O.A.
OKK Model MCV800 –3 Axis CNC heavy duty milling machine
X axis – 1600mm,CNC Y axis Control workpiece
800mm,– Fanuc Z 6M
axis 800mm, Maximum weight 2 tonnes on fixed 2000mm x 900mm table.
Auto tool changer – 30 Tools / BT50 tool capacity,
Spindle drive 15KW. P.O.A.
Mace Group Ltd, Christchurch 8140, NZ
Phone: Ted Mace mob: 021 656 165 email: tedmace@macegroup.co.nz
workpiece weight 2.5 tonne.
(Also ideal machine to fit a CNC retrofit controller). P.O.A.
Webster & Bennett Vertical Lathe Model 48M - Manual Operation,
Great machine for heavy cutting and easy setup Capacity: Diameter
1390 mm, Height Under Rail 620mm Motor 18.5 kw Chuck 4 jaw 1220
Diameter, and some tool holders. P.O.A.
Cincinnati Milacron No-5 Universal Milling Machine - Manual
Operation Capacity: X axis 1200mm, Y axis 500mm, Z axis 300mm
Motorised Overarm with universal milling spindle and also a horizontal
milling spindle. Max workpiece weight 0.2 tonne. P.O.A.
REDUCED PRICE
REDUCED PRICE
REDUCED PRICE
REDUCED PRICE
REDUCED PRICE
/200kgs.Ch
/www.reform-automation.co.nz
/www.customlight.co.nz
/www.redwoodengineering.co.nz
/www.machine.co.nz
/www.schmalz.com
/Www.schmalz.com
/machine.ch
/www.reform-automation.co.nzco.nz
link
link
link
link
link
link
link