6 |DECEMBER 2018 — machinerysales
V1000 Machining Centre
Specifications
X: 1020mm x Y:610mm x Z:610mm,
Fanuc OiMF, Contour control II,
Data server + Ethernet, 12K DDS spindle BBT 40, 30 Tool
swing arm ATC, Coolant & Air through spindle, Coolant
flush, 4th axis driver (servo amplifier), Tool probe TS 27R
Machine structure
The ATC mount is designed to properly support its weight
by putting the force directly into the machine base. Not
suspended off the column, 12,000 rpm direct coupled
BBT40 spindle, Robust fixed pre-tensioned 45mm
diameter, double-nut ballscrews
Ph: (09) 274 6186
Email: info@leabourn-rose.co.nz Heavy Machine Tools
SCOTT 1640 LATHE, ONLY 2
YEARS OLD AND ONLY 40 TO
80HOURS RUN TIME. 3 PHASE,
HAS A 200MM 3 JAW AND
250MM 4 JAW.
QUICK CHANGE TOOL POST
WITH 8 HOLDERS
Swing over bed 410mm
Swing over carriage 250mm
Swing in gap 580mm
Spindle bore 52mm
Distance between centres
1000mm
Bed width 274mm
Number of spindle speeds 16
Speed range 33 - 2,000rpm
Thread range 0.2 - 7mm / 4 -
56 TPI
Tailstock taper 4MT
Motor power 6HP
Weight 1400kg
Inspection welcomed
$12,490 ONO call Steve -
0274 477 870
MATERIALS
HANDLING
SCHMALZ VACUMASTER - MOVE
HEAVY LOADS WEIGHING UP TO
SEVERAL TONS ERGONOMICALLY
AND SECURELY
the VacuMaster allows workpieces
to be handled effortlessly
by just a single operator while
protecting the employeeís
health. For example:
Loading and unloading CNC
laser cutting machines with
metal plates.
Loading and unloading CNC
machining centers with wooden
boards or plastic sheets.
This is German quality at its
very best - built to last.
www.schmalz.com or contact
Automation Equipment on
0800 847 200 or e-mail
sales@autoequip.co.nz to
arrange a meeting.
THE VACUUM TUBE LIFTER JUMBOFLEX
ALLOWS YOU TO MOVE
LIGHTER GOODS UP TO 50 KG
ERGONOMICALLY AND WITH
HIGH CYCLE RATES
The control handle fits comfortably
in the hand and allows
the operator to work for a long
period of time without fatigue.
With simple one-finger control,
lifting, lowering and releasing
the load is extremely intuitive.
The JumboFlexís wide range of
features allows it to tackle virtually
any task. It comes standard
with a quick-change system
for replacing the suction pads.
Workpieces which are gripped
from the vertical side automatically
swing back into the horizontal
position where they can
be continuously
rotated. This is German quality
at its very best - built to last.
www.schmalz.com OR contact
Automation Equipment on
0800 847 200 or e-mail
sales@autoequip.co.nz to
arrange a meeting.
OIL MIST FILTERS
USE FILTERMIST UNITS -
to prevent coolant mist escaping
from your machines and
polluting the workshop and
harming the operators. For full
details contact; Piquet
Machinery Ltd 027 2049901.
email
Piquet.Machinery@xtra.co.nz.
www.piquetmachinery.co.nz
PACKAGING
FILLING MACHINE
Accurate, Stainless Steel. Easy
to set/use. Ideal for free flowing
products at up to approx. 2.5kg
bags. For a demo give us a
call - Contact Geoff or Ken at
Advasco Scales on
09 835 2480. For Sales,
Service and Hire - The Weigh to
Excellence or e-mail
advasco@xtra.co.nz
www.advasco.co.nz
PIPE CUTTING
MACHINES
ORBITAL PIPE CUTTING
MACHINE PROMOTION ON
NOW!
Contact Orbital Tools NZ for
a limited offer on a range of
genuine Orbitalum GF pipe
cutting and bevelling machine
models. Offer while stocks last
or till the 31st of December.
P. 03 218 7465
E. info@orbitaltools.co.nz
W. www.orbitaltools.co.nz
PRESSES
HYDRAULIC / ELECTRIC PRESS
63 TON WITH PRESS BRAKE
ATTACHMENT
Capacity : 63 Ton (with Safety
overload valve) Voltage:
240Volts/50Hz Single phase
Motor: 2.2KW (3HP) Hydraulic
tank: 20L
Bending capacity (mild steel):
4mm over full length (750mm),
10mm over 200mm in length
(Bending capacity physically
tested by us.)
Ram travel: 265mm
Bed maximum opening:
310mm (Press brake attachment
installed)
Bed maximum distance to
Ram: 700mm (Press brake attachment
removed)
Bed table size: W780mm,
D350mm with 90mm centre
RA 8379
21.5” Touch screen and 3D
visualisation standard.
Other optional features
0800 288 668
Electric or Servo Hydraulic
Press Brake 40T~250T
www.reform-automation.co.nzco.nz
0800 288 668 PRECISION, PRODUCTIVITY, SAFETY
www.reform-automation.co.nz Phone:
LR 8366
hole 3 sided Multi V die 80mm,
V sizes 60mm, 15mm, 25mm,
35mm.
Overall dimensions: H1900mm,
W1300mm, D500mm
Overall Weight: 740KG
Foot pedal control for up /
down ram movement (to be
secured to your chosen floor
position)
Supplied pre commissioned
tested and run in our workshop
with 20L hydraulic oil.
High capacity workshop
forming press with extra 2
guide rods on each side of
main ram.
Including table moving attachment
via chains and hydraulic
ram.
Press Brake attachment is removable
if needing to use as a
normal workshop press. Table
is permanent under lower
die(lower Die removable &
adjustable).
$7,500
Visit us at
www.jnaproducts.co.nz or call
Jim 021 176 6743
PROFILE CUTTERS
CNC CONTROLLED CUTTING
TABLE AND FREE STANDING
MONITOR WITH SCREEN. THE
INTECUT S IS OUR ENTRY LEVEL
FULL TABLE FORMAT AND FEATURES
A WATER FILLED BED
TO CATCH FUME.
The Intecut S will take a full
1500 x 3000mm sheet up to
25mm thickness.
$19,950 + GST. Price includes
full set up and operator training.
Phone 0800 000 144
www.duroweld.co.nz
enquiries@duroweld.co.nz
CNC SAMSON PROFILE CUTTING
MACHINE MANUFACTURED BY
PLASMACAM IN USA. TABLE
CAPACITY 1500 X 3000MM.
Sold this unit brand new about
7 years ago to the local poly
tech who have not used this
machine a great deal so is in
excellent condition. We traded
this machine on one of our
Hugong Flashcut machines.
Does not come with the Hyperther
plasma unit - happy to
quote.
The PlasmaCam software is
unique in its design and has
some design features not available
on most other machines
on the market.
$15,250 + GST.
Phone 0800 000 144
www.duroweld.co.nz
enquiries@duroweld.co.nz
HUGONG INTECUT 5 PROFILE
CUTTING MACHINE COMPLETE
WITH TABLE, SOFTWARE
PACKAGE AND TRAINING.
Cutting capacity; 1500 x
3400mm. Plasma not included.
$12,350 + GST. Price includes
installation and training New
Zealand wide.
Phone 0800 000 144
www.duroweld.co.nz
enquiries@duroweld.co.nz
SCALES
INDUSTRIAL - including Heavy
Duty. New & Used - Sale & Hire
- Special Designs. We have a
fantastic range of scales to suit
all needs - At Wholesale Prices,
giving the best accuracy with
Tare. Harsh environments and
hard use a speciality.The Weigh
to Excellence phone Advasco
Scales Ltd 09 8352480
or e-mail advasco@xtra.co.nz
www.advasco.co.nz
THE CUBE’N’WEIGH IS A SINGLE
STEP, WEIGH AND VOLUME
MEASURING SYSTEM THAT DISPLAYS
BOTH RESULTS WITHIN 3
SECONDS !
Doing this manually with a
weigh scale, tape measure and
calculator, is both time consuming
and impractical.
• Max parcel size:
800x700x600mm or custom
made to suit
• Typical operation accuracy
+/- 0.05kg and +/- 0.001 cubic
metres
• Max weight: 300kg
Option 01 Output to Pc.
For a demo give us a call
- Contact Geoff or Ken at
Advasco Scales on 09 835
2480. For Sales, Service and
Hire - The Weigh to Excellence
or email
advasco@xtra.co.nz
www.advasco.co.nz
/www.schmalz.com
/www.schmalz.com
/www.piquetmachinery.co.nz
/www.advasco.co.nz
/www.advasco.co.nz
/www.advasco.co.nz
/www.orbitaltools.co.nz
/www.reform-automation.co.nzco.nz
/www.reform-automation.co.nz
/www.jnaproducts.co.nz
/www.duroweld.co.nz
/www.duroweld.co.nz
/www.duroweld.co.nz
link
link
link
link
link
link
link
link
link
link
link