To advertise your product or service in Stock Take call Michael on 0275 404 897
ZEROFRY FOR
CRUMB-COATED
SNACKS
Crisp Sensation, a food coating system expert, enable manufacturers to
produce crispy, crumb-coated snacks without the need for pre-frying or
deep-frying. This breakthrough innovation is perfectly suited to the needs of
health-conscious consumers.
ZeroFry coatings guarantee the same crunchy sensation and taste as
pre-fried products but allow for a fat reduction of 50% and a considerable
reduction in calories too.
Neither the production process, nor the final preparation requires deep-frying:
ZeroFry crumbed products can be prepared in an oven or airfryer.
www.crispsensation.com
KEEPING SITE SAFETY ON THE RIGHT TRACK
8 MAY 2019
SiteSoft New Zealand Limited
Email: support@SiteSoft.com | Freephone: +64 800 748 763 | Visit: www.SiteSoft.com
SiteSoft GeoTrack tracks your contractors and
visitors and meets the compliance requirements of
the 2015 Health & Safety at Work Act.
“Our solution uses GPS tracking technologies to
determine if a visitor or contractor is entering a site,
is onsite or is leaving a site. Upon arrival SiteSoft
GeoTrack date and time stamps the visit and
delivers a site-specific induction to the person’s
mobile device. They are then required to view the
provided induction material and acknowledge that
it was read,” says SiteSoft.
They are also prompted to provide a reason
for their site visit which makes reporting quick,
convenient and thorough.
So how are contractors tracked? A GeoFence
is set up on a map. A GeoFence (magic fence,
invisible fence as some call it) is an area marked
on a map. Think of it as a virtual perimeter. When
a contractor crosses the virtual perimeter, they are
marked to be onsite. You can see it live in your
onsite reports.
You can also register hazards, risks and incidents
using SiteSoft which can automatically displayed to
visitors and contractors when they enter your site.
High performance in water and dust contaminated
environments, NSK’s environmentally-friendly
Molded-Oil bearings offer high performance in
severe water and dust contaminated environments.
Molded-Oil bearings are designed to prevent
damaging liquids such as water (which can wash
the lubricating grease out) and dust from getting
inside the bearings. Sealed ball bearings can be
used in environments exposed directly to water
and dust where bearing damage is dramatically
accelerated. There is no risk of grease leakage
in critical clean applications. They are also ideal
for applications in which bearing are exposed to
large quantities of liquids such as water. Corrosion
resistance and operating life can be further
enhanced by using long-life, corrosion-resistant
stainless steel (NSK’s ES1).
Available in deep groove ball, spherical roller and
self-aligning insert ball bearings.
Condition descriptions include contamination, water,
corrosion, poor lubrication, critical clean room
Potential applications: food processing, conveyor
equipment, agricultural machines, cleaning
equipment
BEARING
THIS IN MIND
NSK New Zealand
P: +64 9 276 4992, | F: +64 9 276 4082 | www.nsk.com
/www.crispsensation.com
/www.SiteSoft.com
/www.nsk.com
link
