S T O C K TA K E
HIGH-QUALITY PROFILE CUTTING
If you seek high-quality plasma and oxy fuel
cutting then there’s no need to look past Cut
Fold NZ.
With a current 1 to 3 day turnaround time, Cut
Fold can provide a huge range of plate from
G250, G300, G350, BIZ80, Biz Wear 450,
aluminium and stainless steel.
Cut Fold’s high-speed plasma cutter is
described by Hypertherm as the fastest bevel
head machine in the world, with positioning
speeds of 60 metres per minute, providing more
parts per hour.
Features at a glance include:
• Hypertherm XPR300 power source with true
hole and true bevel technology
• 360 degree bevel head
• 9000x3200mm bed
• Pierce up to 50mm in mild steel, 38mm stainless
steel and 38mm in aluminium
• Edge start 80mm mild steel, 75mm stainless
steel and 50mm aluminium
Cut Fold’s back up plasma/oxy fuel machine has
a cutting area of 6000x3200mm with 275 amp
Kaliburn plasma and includes three oxy heads
cutting up to 280mm thick plate.
Cut Fold NZ
Phone: 07 871 6565 l 020 407 92325
E-mail: sales@cutfoldnz.co.nz Website: www.cutfoldnz.co.nz
POWERBEND PROFESSIONAL – FOLD LIKE A PRO
The PowerBend Professional folding machine is the professional solution for your
sheetmetal shop. This robust yet precise folder is ideal for continuous operation in large
workshops for industrial manufacturers.
Constructed with the latest techniques of the finite-element-method and state-of-the-art
computer simulations, Schroeder Group has decades of experience in industrial folding
machines and that has been incorporated into the development of the Powerbend
Professional.
Thanks to the available/optional segmented tools on all beams, superior drive technology
and advanced electronic control, the PowerBend Professional can handle complex
geometries and difficult bending requirements with ease.
With the hydraulic tool clamping device and the optional rotating clamping beam, set up
times can be drastically reduced. The result is a considerable increase in productivity.
A combination of press brakes and folding machines will increase productivity in any
fabrication facility, giving you the edge on the competition.
Fribesco Ltd
Phone: 09 622 0107 | Email: info@fribesco.com | Web www.fribesco.com
SAFEGUARD YOUR PRODUCTS WITH CORROSIONX
If you are looking to water proof electronics and
electrics then look no further than CorrosionX,
available from Applied Industrial Technologies, a
super-fast penetrant and ‘trouble-shooter’ on all
things mechanical and electric.
CorrosionX Heavy Duty is a long-term outdoor rust
protection solution that can be used as a lubricant on
dry wires, fork lift chains and occasionally submerged
contacts, multi plugs, solenoid and more.
CorrosionX Grease is also available and is a lubricant
and corrosion inhibitor for crane wires (both luff and
hoist), in high load/high speed bearings and corrosive
environments.
Applied Industrial Technologies
Phone: (09) 274 0056 E-mail: nz-logistics@appliednz.com
Features include:
• NZ MPI classified as a C11 (same as Lanolin)
• Contains 0% volatile organic content
• Will never gunk up or dry out
• CorrosionX is typically testing to 39.000 volt dielectric
strength, CX HD does 25.000 volt and is as such an
ideal insulator when assembling dissimilar metals
• Four-times as slippery as engine oil
• Non-flammable
• Extremely safe on all plastics, rubber, neoprene,
paint, insulation and more
• Can be applied over already wet, already corroded
metal surfaces
Website: www.appliednz.co.nz Facebook: www.facebook.com/appliednz/
www.engineeringnews.co.nz 7
/www.cutfoldnz.co.nz
/www.fribesco.com
/www.appliednz.co.nz
/
/www.engineeringnews.co.nz
link
link
link